Skip to content
SAFICONSTRUCTION · CAULKING

Residential · Commercial · High-Rise

Our Services

Safi Caulking / SAFI Construction specializes in professional caulking, sealant, glazing, waterproofing, and building-envelope services for residential, commercial, and high-rise properties throughout Toronto, the GTA, and surrounding areas in Ontario.

We provide both new installation and complete removal and replacement of existing sealants, using professional commercial-grade materials and proper installation methods to create durable, clean, weather-resistant finishes.

16 services across 6 areas of work.

01

Window & Door Sealant

The joint between a frame and the wall around it is where water gets in first. We cut the failed sealant out, clean the joint back to sound substrate, set backer rod to the right depth, then gun and tool the bead in one pass so it sits flush and runs straight.

  • Exterior & interior window and door caulking
  • Complete removal and replacement of old caulking
  • Air-barrier and foam sealing around windows and doors
  • Backer rod installation

In the owner's own words

Tight close-up of a window sill and frame corner with a beautifully tooled glossy black bead running the sill joint and turning cleanly at the brick; sharp, well exposed, the single clearest piece of craft in this batch.
02

Glazing & High-Rise

Curtain wall, storefront and high-rise façades, sealed from swing stages, bosun chairs and rope access. The top of the building gets the same bead as the ground floor — and it is not work a general contractor can improvise.

  • Glass-to-aluminum and curtain-wall glazing
  • High-rise window and façade caulking

In the owner's own words

Rope access technician rappelling down a tower face to reach the joints, seen from directly above.
03

Masonry & Joint Sealing

Expansion and control joints have to move without tearing. That means the right joint geometry, the right backer, and a sealant rated for the movement the joint will actually see — not whatever was on the truck.

  • Precast-to-precast and panel joint sealing
  • Expansion and control joints
  • Brick, stone, stucco, concrete and masonry joints
  • Flashing and metal-to-metal sealing

In the owner's own words

Concrete slab with freshly sealed control joints running through the frame; clean, well-lit detail of joint sealing.
04

Waterproofing & Leak Repair

When water is already getting in, the first job is finding where — not sealing everything and hoping. We trace the path, then treat the assembly: balconies, parapets, through-wall details and the transitions where two materials meet.

  • Balcony waterproofing and sealing
  • Water-leak investigation and repair
  • Building-envelope maintenance and restoration

In the owner's own words

Swing stage rigged at the base of a curved condo tower with the crew in hi-vis, protective netting along the podium.
05

Firestopping & Smoke Sealing

Rated assemblies stay rated only if every penetration through them is sealed with the right firestop system. This is inspection work as much as trade work, and it is documented.

  • Firestopping and smoke sealing

In the owner's own words

High-rise condominium under exterior sealing work, protective screening wrapped around the podium level.
06

Re-Caulking & New Construction

Two ends of the same trade: stripping out twenty-year-old sealant on an existing building, and laying the first bead on a new one. Both get commercial-grade materials and the same preparation.

  • Commercial and residential re-caulking
  • New-construction caulking and sealant installation

In the owner's own words

New sliding patio door in brick with a continuous fresh black seal around the full perimeter and across the threshold; straight on, evenly lit and clean top to bottom.

Difficult access

We reach the parts other trades cannot

For difficult-access and high-rise projects, our team is experienced in working from swing stages, bosun chairs, boom lifts, scissor lifts, and scaffolding.

  • Swing stages
  • Bosun chairs
  • Rope access
  • Boom lifts
  • Scissor lifts
  • Scaffolding

Process

How a job runs

  1. 01

    Free estimate

    Send the address and photos, or we come and measure. We quote in linear feet, split into frame-to-brick and glass-to-frame, so you can see exactly what you're paying for.

  2. 02

    Prep

    Old sealant cut out, joint cleaned back to sound substrate, backer rod set to the correct depth.

  3. 03

    Seal

    The right sealant for the substrate and the movement, gunned and tooled in one pass.

  4. 04

    Clean-up

    Site left clean. Before and after photos on request.

From a single leaking window to large multi-storey restoration projects, our focus is on proper preparation, professional workmanship, quality materials, and long-lasting results.

Get a Free Estimate